Bag filter blowing system is the heart of the dust collector, blowing system high pressure air supply equipment whether can normal operation, related to bag filter spray blowing system whether normal operation, the bag filter air compressor to take reasonable use and proper maintenance to ensure parts accuracy, improve the utilization rate of equipment, reduce maintenance costs, ensure the normal production of bag filter and improve economic benefit.

Air compressor operation steps of bag filter:

(1) inspection, preparation and start up of the bag type dust collector

Check the bag filter air compressor of the fastening parts are not loose, whether in the normal state.

The air compressor in the air compressor of the full bag filter shall be provided with a grade of lubricating oil to the oil as the oil window. V type air compressor oil to the oil mirror 2/3.

Hand wheel drive large belt pulley, see whether the rotation is flexible, carefully check whether there are obstacles or abnormal sound.

Drive motor, electrical wiring, and intermittent starting, the wiring is correct, whether the running direction as machine on the direction of the arrow shown in.
The clean, remove all obstacles near the machine.

After the completion of the work can start the bag type dust remover, the bag type dust remover air compressor load run 10 ~ 12min will exhaust valve is screwed to the fully open state, if no abnormal phenomenon can be gradually closed small vent valve, pressure adjusted to the rated pressure, the machine will enter the full load operation. In the course of the operation, check whether the machine is normal, and check valve, safety valve action is sensitive, accurate and reliable, and then officially put into use.