The single machine bag type dust collector has the characteristics of small size, large capacity, easy to use, and so on. The utility model has the characteristics that the utility model can directly fall into the ash bin or the belt conveyor equipment, which is mainly suitable for the use of the collection dust of the top of the reservoir, the bottom of the reservoir, the conveyor belt and other local dust sources. Dust contained gas is composed of a cloth bag dust remover entrance into the box body, through the filter bag filter, dust is bag to remain in the inner surface, the purified gas through the filter bag into the fan, by fan suction directly discharged into the indoor, can also be connected to the exhaust pipe to the exhaust to the outside. With the increase of filtration time, inside the bag surface adhesion of dust is also increasing, bag resistance increased. Therefore, it is needed to clear ash, after cleaning, dust collector and normal work. The dust collector using automatic cleaning mechanism of timing vibration cleaning ash or manual cleaning ash shut down manually automatic rapping tens of seconds, so that the adhesion in the filter bag dust on the surface of shake down. The dust falls into the bucket, the drawer or directly onto the production equipment.

This series of single bag type dust collector is widely used in cement industry, but also can be used in the industry, such as casting industry, ceramic industry, glass industry, grinding wheel, chemical products, machinery processing and other industries. The product comparison heavy large metal cutting, casting sand and medium gravity dust, such as cement, ceramic raw material powder, pigment, bakelite powder, plastic powder, and the proportion of lighter wood processing, dust has good dust removing effect, the concentration of emissions meet the national discharge standard.